Home › Window Shades › Solar Shades › Graber Lightweaves Solar Shades - Blocks 98 Percent of Light



Graber Lightweaves Solar Shades - Blocks 98 Percent of Light

$148.30

retail: $593.18 you save 75%

Final price could vary depending on the options you select.

  • + FREE shipping
  • + Lifetime Warranty
  • +

Graber Lightweaves 2% Openness (Blocks 98% of Outside Light) solar shades come in a variety of colors and light control options that allow you to still see outside while blocking 98% of harmful UV Rays. Stylish and practical these solar shades offer an array of attractive colors and woven textures. Offers greatest light filtering, most efficient at blocking damaging UV rays! They are beautiful and functional and look great in any room of the house. Keep your view while minimizing glare and protecting your home from heat gain and harmful UV rays. These solar shades are class A fire rated, GREENGUARD certified, certified for children and school use and bacteria, mold, and fungal resistant.

FEATURES

  • Free Shipping
  • Lifetime Warranty
  • Child Safe Cordless lift system available
  • Valance, Fascia and Cassette Options available
  • Standard or Reverse Roll available

SPECIFICATIONS

  • Minimum width: 13"
  • Maximum width: 144"
  • Minimum height: 13"
  • Maximum height: 144"
  • Minimum Outside Mount Depth Requirement:¾ inch
  • Height of headrail:1 ½ inches
  • Approximately 3/4" Light Gap on each side
  • Cassette Valance Maximum Width 96"
  • No Valance Minimum Depth Required 3/4"
  • No Valance Minimum Depth Required for flush mount 2 1/2"
  • Cassette Minimum Depth Required 1 1/8"
  • Cassette Minimum Depth Required for Flush Mount 3"
  • Fascia Minimum Depth Required 1 1/8"
  • Fascia Minimum Depth Required for Flush Mount 3 1/2"

Solar Shades fabrics will be approximately 7/8" to 1 3/8" narrower than your ordering width to allow for brackets (approximately 1/2" - 3/4" on each side of the shade). Lift system and valance option will determine this deduction.

Factory deductions: Outside mount: No deductions on headrail, 1/2" light gap on either side of fabric. Inside mount: Continuous Cord Loop: 1/8" headrail deduction with 1/2" light gap per side. Cordless: 1/8" headrail deduction with 3/4" light gap per side. Cassette option: 1/4" headrail deduction with light gap of 11/16" per side.

Do not account for factory fabric deductions when measuring your shades.

While most fabrics in this category have widths between 98" and 126" some can fabrics may be railroaded.  Railroading material is when the shade material width is cut from the length of the material off the bolt and the height of the shade is cut from the roll width of the material bolt. A shade must be railroaded if the shade width is wider that the material roll width.

Solar shade fabrics are available in several levels of openness. Openness simply refers to how tight the weave is, which directly reflects the amount of light that is let in through the fabric. A low openness factor means that the fabric is more tightly woven and there will be less visibility through the shade with a higher degree of light control.  A high openness factor features a looser weave and therefore greater visibility.

Light Gaps - Please note that the actual fabric/material for roller/solar shades will measure approximately 1 1/4"-1 5/8" less to allow space for shade brackets, clutch and lift controls.   The finished shade width from bracket to bracket will be the width ordered within 1/8".

…  see full product description.
Customize Now >

Want a professional to measure or install? Locate one now




Customize your new Graber Lightweaves Solar Shades - Blocks 98 Percent of Light

Some features and options you select could affect product pricing.
As you begin customizing this product, we'll keep the updated price in view at all times.

Price with current selections:
$148.30

Select a mount type:


Inside mount blinds and shades are mounted inside the window frame. This option provides a clean, custom look and is considered the most popular choice. This is a great option if you do not wish to cover the window moldings.


Outside mounted blinds and shades are mounted outside the window, on your wall or molding. This option can make a window appear larger. It is also a solution if the window does not meet the depth requirement for an inside mount

Select a size (in inches): how to measure

 

Width:
Height:

Select a color / pattern:

Color Disclaimer: We do our best to depict an accurate representation of the actual swatch color. Colors can vary from monitor to monitor. Please order a free sample to ensure accuracy.

LiveWell - Blocks 98% of Outside Light

Dew Kissed S_10251
Finely Frosted S_10252
Succulent S_10253
Sandbar S_10254
Icelandic S_10255
Seaspray S_10256

Olbrecht - Blocks 98% of Outside Light

Engaging Greige S_10331
River Rock S_10332
Driftwood S_10333
Flaxseed S_10334

Select your controls:
*some options may not be available on every shade

Select roller type:


On a standard roller shade, the fabric rolls off the back of the roller, closest to the window. Selecting this option will allow you to further customized your shade with valance options.


On a reverse roll, the fabric rolls off the front of the roller, away from the window.



Additional Comments / Room Name / Sidemarks:

Order Summary:

Width: edit
Height: edit
Color / Pattern: Please Select
Mount Type: Please Select
Control: Please Select
Roller Type: Standard Roller edit
Valance: Standard Valance edit

$148.30

Graber Lightweaves 2% Openness (Blocks 98% of Outside Light) solar shades come in a variety of colors and light control options that allow you to still see outside while blocking 98% of harmful UV Rays. Stylish and practical these solar shades offer an array of attractive colors and woven textures. Offers greatest light filtering, most efficient at blocking damaging UV rays! They are beautiful and functional and look great in any room of the house. Keep your view while minimizing glare and protecting your home from heat gain and harmful UV rays. These solar shades are class A fire rated, GREENGUARD certified, certified for children and school use and bacteria, mold, and fungal resistant.

FEATURES

  • Free Shipping
  • Lifetime Warranty
  • Child Safe Cordless lift system available
  • Valance, Fascia and Cassette Options available
  • Standard or Reverse Roll available

SPECIFICATIONS

  • Minimum width: 13"
  • Maximum width: 144"
  • Minimum height: 13"
  • Maximum height: 144"
  • Minimum Outside Mount Depth Requirement:¾ inch
  • Height of headrail:1 ½ inches
  • Approximately 3/4" Light Gap on each side
  • Cassette Valance Maximum Width 96"
  • No Valance Minimum Depth Required 3/4"
  • No Valance Minimum Depth Required for flush mount 2 1/2"
  • Cassette Minimum Depth Required 1 1/8"
  • Cassette Minimum Depth Required for Flush Mount 3"
  • Fascia Minimum Depth Required 1 1/8"
  • Fascia Minimum Depth Required for Flush Mount 3 1/2"

Solar Shades fabrics will be approximately 7/8" to 1 3/8" narrower than your ordering width to allow for brackets (approximately 1/2" - 3/4" on each side of the shade). Lift system and valance option will determine this deduction.

Factory deductions: Outside mount: No deductions on headrail, 1/2" light gap on either side of fabric. Inside mount: Continuous Cord Loop: 1/8" headrail deduction with 1/2" light gap per side. Cordless: 1/8" headrail deduction with 3/4" light gap per side. Cassette option: 1/4" headrail deduction with light gap of 11/16" per side.

Do not account for factory fabric deductions when measuring your shades.

While most fabrics in this category have widths between 98" and 126" some can fabrics may be railroaded.  Railroading material is when the shade material width is cut from the length of the material off the bolt and the height of the shade is cut from the roll width of the material bolt. A shade must be railroaded if the shade width is wider that the material roll width.

Solar shade fabrics are available in several levels of openness. Openness simply refers to how tight the weave is, which directly reflects the amount of light that is let in through the fabric. A low openness factor means that the fabric is more tightly woven and there will be less visibility through the shade with a higher degree of light control.  A high openness factor features a looser weave and therefore greater visibility.

Light Gaps - Please note that the actual fabric/material for roller/solar shades will measure approximately 1 1/4"-1 5/8" less to allow space for shade brackets, clutch and lift controls.   The finished shade width from bracket to bracket will be the width ordered within 1/8".



Measuring: Inside Mount

  • Always measure each window you plan to cover. Windows of different sizes can appear deceptively similar.
  • Measure in 3 locations for width and height. Use the smallest measurement (if they are not all the same) rounding down to the nearest 1/8 in.
  • Do not make any deductions, allowances or additions.
  • Check for squareness by measuring on diagonals.
  • Note: If diagonal measurement differs by more than 1/8 in., choose outside mount instead.
  1. STEP 1 – Find the width: Measure exact distance to the nearest 1/8" between the inside surfaces of window frame in three places (across the top, across the middle, and across the bottom – see image). Use the narrowest measurement when ordering the width. Do not make any additional width deductions – the factory will make the appropriate deductions to ensure proper fitting.
  2. STEP 2 – Find the height: Measure exact distance to the nearest 1/8" from inside surface at top of window to the window sill in three places (on the left, middle, and right – see image). Use the longest measurement when ordering the height. If you prefer blind not to touch sill, deduct 1/4". If there is no sill, measure to the point where blind is to reach.

Measuring: Outside Mount

  • Always measure each window you plan to cover. Windows of different sizes can appear deceptively similar.
  • Use a steel / metal tape measure for accuracy.
  • Record measurements to the nearest 1/8" of an inch. Make sure you clearly indicate width from the height. It's very easy to accidentally transpose measurements.
  • Measure the height to the outer edges of the molding in 3 places (your molding is part of the measurement). If you have a sill, measure from the top of the sill to the top of the molding. Measure the window height in 3 places. Record the longest measurement rounding up to the nearest 1/8 in.
  • Do not take any deductions, allowances or additions.
  1. STEP 1 – Find the width: Measure exact distance to the nearest 1/8" between the outermost points where the blind is to be placed. For optimum light control, this measurement should extend at least 3/4" beyond the window opening on each side (or 1 1/2" for the entire width)
  2. STEP 2 – Find the height: Measure exact distance to the nearest 1/8" from where top of blind will be located to the top of the window sill. If there is no sill, or if blind is to overlap the window frame, measure to the point where the blind is to reach.

Blinds & Shades:

We offer FREE SHIPPING on all our custom blinds & window shade orders shipping within the contiguous United States. Products under 94" in width (or length for vertical blinds) ship free of charge via UPS and/or FedEx from the manufacturing facility located closest to you. Oversized shipments require delivery via freight with a one-time shipping cost of $99.00 per order.

Shutters:

Due to packaging and weight shutters do not ship free. All Shutter orders ship at a flat rate of $70.00 per order.

Commercial Orders:

Commercial orders will be quoted with the cost of shipping.

Alaska & Hawaii

Shipping to Alaska and Hawaii have additional charges and will be quoted at the time the order is placed.

Next day or second day air shipping is available on many, but not all, products at an additional cost. This is quoted when requested.

Product Warranty: Graber Window Blinds

Limited Lifetime Warranty on:

1/2", 1" and 2" Aluminum Horizontal Blinds, 2" headrail and components, Wood, Faux Wood and Composite Blinds, Vertical headrails, channel panels, valances, sheer fabric and painted or stained cornices (unfinished cornices are not warranted)

3-Year Limited Warranty on:

2" vinyl slats, 2" acrylic slats, Vertical vanes (vinyl, S-shaped and fabric)

What is Covered:

This product is warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that:

  • The product was properly installed in a residential dwelling
  • The product was made or assembled exclusively from Springs Window Fashions' materials and components
  • Springs Window Fashions' recommendations were followed with regard to limitations and specifications

Who is Covered:

This warranty extends only to you as the original purchaser of the above stated product.

Obligations to the Consumer:

The obligations of Springs Window Fashions are limited to the repair or replacement of parts or products found to be defective. Springs Window Fashions is not responsible for shipping costs or labor costs, for measuring and taking the product down or for remeasuring or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.

Motorization:

Components and accessories have a five-year limited warranty. Batteries not included.

What is Not Covered:

This warranty does not cover conditions or damages caused by abuse, accidents, alterations, misuse or failure to follow instructions for measurement, installation, use, cleaning or maintenance. Normal wear and tear, including but not limited to the items or occurrences below, is not covered by the warranty. Springs Window Fashions considers these items and occurrences normal wear and tear and they are not covered by this warranty

  • Unfinished cornices
  • When left for extended periods in direct sunlight, plastics tend to yellow or crack
  • Some slight warpage, as well as natural variations in color and grain, are normal with a wood product and are not considered defects. Areas of high humidity may cause excessive warpage of wood slats
  • Some loss of color intensity or discoloration may occur in plastic materials or wood finishes when exposed to direct sunlight over long periods of time
  • All fabrics can lose original intensity after long exposure to the sun
  • Colors may vary from lot to lot and may not exactly match samples of previous purchases
  • All cords will eventually wear out