Add a splash of style to your exterior by choosing weather-resistant, energy-efficient Graber Exterior Solar Shades. They provide superior sun and heat protection for your outdoor living spaces. Plus, exterior solar shades can block sunlight before it gets inside your home—which can lower your cooling bills. Designed to make your home more energy efficient by blocking damaging UV radiation and reducing solar heat gain. Choose your privacy level with 1-14% open weaves (lower openness percentages mean higher privacy and light blockage). Graber exterior solar shades are rated for exterior use.

Specifications/Features:

Maximum Width 141"
Minimum Width 24"
Maximum Height 144"
Headrail Color-Coordinated to Fabric
Light Gap per side 9/16"-13/16" with continuous cord loop with no cassette
Light Gap per side 9/16"-1 1/16" with continuous cord loop with cassette
Fully recessed inside mount depth required with no valance is 4 1/8"
Minimum inside mount depth with no valance is 3/4"
Fully Recessed inside mount depth with cassette is 4 1/2" - 5 1/2"
Minimum inside mount depth with cassette is 1 3/4"
Components are rated for exterior use.
Hold Down brackets included for manual shades (Four Colors: black, brown, vanilla & white)
Stainless Steel Chain

Motorized Shade Details:

Two Power Options
1. Plug In, 3-prong plug/residential outlet
2. Power Cable (wired by an electrician)
Motorized shades have a radio frequency AC motor
Wireless remote and wall switches available for additional charges
Side Guide Cables (stainless steel)
Universal Cable Locks/Holddowns connects to guide cables

Measuring: Inside Mount

Always measure each window you plan to cover. Windows of different sizes can appear deceptively similar.
Measure in 3 locations for width and height. Use the smallest measurement (if they are not all the same) rounding down to the nearest 1/8 in.
Do not make any deductions, allowances or additions.
Check for squareness by measuring on diagonals.
Note: If diagonal measurement differs by more than 1/8 in., choose outside mount instead.

STEP 1 – Find the width: Measure exact distance to the nearest 1/8" between the inside surfaces of window frame in three places (across the top, across the middle, and across the bottom – see image). Use the narrowest measurement when ordering the width. Do not make any additional width deductions – the factory will make the appropriate deductions to ensure proper fitting.
STEP 2 – Find the height: Measure exact distance to the nearest 1/8" from inside surface at top of window to the window sill in three places (on the left, middle, and right – see image). Use the longest measurement when ordering the height. If you prefer blind not to touch sill, deduct 1/4". If there is no sill, measure to the point where blind is to reach.

Measuring: Outside Mount

Always measure each window you plan to cover. Windows of different sizes can appear deceptively similar.
Use a steel / metal tape measure for accuracy.
Record measurements to the nearest 1/8" of an inch. Make sure you clearly indicate width from the height. It's very easy to accidentally transpose measurements.
Measure the height to the outer edges of the molding in 3 places (your molding is part of the measurement). If you have a sill, measure from the top of the sill to the top of the molding. Measure the window height in 3 places. Record the longest measurement rounding up to the nearest 1/8 in.
Do not take any deductions, allowances or additions.

STEP 1 – Find the width: Measure exact distance to the nearest 1/8" between the outermost points where the blind is to be placed. For optimum light control, this measurement should extend at least 3/4" beyond the window opening on each side (or 1 1/2" for the entire width)
STEP 2 – Find the height: Measure exact distance to the nearest 1/8" from where top of blind will be located to the top of the window sill. If there is no sill, or if blind is to overlap the window frame, measure to the point where the blind is to reach.

Blinds & Shades:

We offer FREE SHIPPING on all our custom blinds & window shade orders shipping within the contiguous United States. Products under 94" in width (or length for vertical blinds) ship free of charge via UPS and/or FedEx from the manufacturing facility located closest to you. Oversized shipments require delivery via freight with a one-time shipping cost of $99.00 per order.

Shutters:

Due to packaging and weight shutters do not ship free. All Shutter orders ship at a flat rate of $70.00 per order.

Commercial Orders:

Commercial orders will be quoted with the cost of shipping.

Alaska & Hawaii

Shipping to Alaska and Hawaii have additional charges and will be quoted at the time the order is placed.

Next day or second day air shipping is available on many, but not all, products at an additional cost. This is quoted when requested.

Product Warranty: Graber Window Blinds

Limited Lifetime Warranty on:

1/2", 1" and 2" Aluminum Horizontal Blinds, 2" headrail and components, Wood, Faux Wood and Composite Blinds, Vertical headrails, channel panels, valances, sheer fabric and painted or stained cornices (unfinished cornices are not warranted)

3-Year Limited Warranty on:

2" vinyl slats, 2" acrylic slats, Vertical vanes (vinyl, S-shaped and fabric)

What is Covered:

This product is warranted against original defects in materials or workmanship for as long as the original purchaser owns the product provided that:

The product was properly installed in a residential dwelling
The product was made or assembled exclusively from Springs Window Fashions' materials and components
Springs Window Fashions' recommendations were followed with regard to limitations and specifications

Who is Covered:

This warranty extends only to you as the original purchaser of the above stated product.

Obligations to the Consumer:

The obligations of Springs Window Fashions are limited to the repair or replacement of parts or products found to be defective. Springs Window Fashions is not responsible for shipping costs or labor costs, for measuring and taking the product down or for remeasuring or reinstalling the product. If repairs are made under this warranty, the repairs will be made with like or similar parts.

Motorization:

Components and accessories have a five-year limited warranty. Batteries not included.

What is Not Covered:

This warranty does not cover conditions or damages caused by abuse, accidents, alterations, misuse or failure to follow instructions for measurement, installation, use, cleaning or maintenance. Normal wear and tear, including but not limited to the items or occurrences below, is not covered by the warranty. Springs Window Fashions considers these items and occurrences normal wear and tear and they are not covered by this warranty

Unfinished cornices
When left for extended periods in direct sunlight, plastics tend to yellow or crack
Some slight warpage, as well as natural variations in color and grain, are normal with a wood product and are not considered defects. Areas of high humidity may cause excessive warpage of wood slats
Some loss of color intensity or discoloration may occur in plastic materials or wood finishes when exposed to direct sunlight over long periods of time
All fabrics can lose original intensity after long exposure to the sun
Colors may vary from lot to lot and may not exactly match samples of previous purchases
All cords will eventually wear out

where blinds come from
SINCE 1975

Graber Exterior Solar Shade - Blocks 90 Percent of Light

$119.02

org price: $166.63 you save 40%

Customize your new Graber Exterior Solar Shade - Blocks 90 Percent of Light

Select a mount type:

Select a size (in inches): how to measure

Select a color / pattern:

Select your controls:
*some options may not be available on every blind

Select your valance:

Select your style package:

Select your valance:

Additional Comments / Room Name / Sidemarks:

Order Summary:

Measuring: Inside Mount

Measuring: Outside Mount

Blinds & Shades:

Shutters:

Commercial Orders:

Alaska & Hawaii

Product Warranty: Graber Window Blinds

Limited Lifetime Warranty on:

3-Year Limited Warranty on:

What is Covered:

Who is Covered:

Obligations to the Consumer:

Motorization:

What is Not Covered:

Price with current selections:
$119.02

Graber Exterior Solar Shade - Blocks 90 Percent of Light

$119.02

org price: $166.63 you save 40%

Customize your new Graber Exterior Solar Shade - Blocks 90 Percent of Light

Select a mount type:

Select a size (in inches): how to measure

Select a color / pattern:

Select your controls: *some options may not be available on every blind

Select your valance:

Select your style package:

Select your valance:

Additional Comments / Room Name / Sidemarks:

Order Summary:

Measuring: Inside Mount

Measuring: Outside Mount

Blinds & Shades:

Shutters:

Commercial Orders:

Alaska & Hawaii

Product Warranty: Graber Window Blinds

Limited Lifetime Warranty on:

3-Year Limited Warranty on:

What is Covered:

Who is Covered:

Obligations to the Consumer:

Motorization:

What is Not Covered:

Select your controls:
*some options may not be available on every blind