3 1/2 inch nulite prestige vinyl vertical blinds

  • 3 1/2 inch nulite prestige vinyl vertical blinds thumbnail

3 1/2" Nulite Prestige Vinyl Vertical Blinds

$38.30

retail: $153.22 you save 75%

Final price could vary depending on the options you select.

  • + FREE shipping
  • + Lifetime Warranty
  • +

Vinyl vertical blinds are perfect for large windows or sliding glass doors. They are durable and attractive. Choose from an array color options. Vinyl verticals are low maintainance with optimal light control and privacy. These Nulite Prestige Vinyl Vertical blinds come with a lifetime warranty.

 

FEATURES

  • 60 Colors Available
  • Limited Lifetime Warranty
  • Free Shipping
  • Perfect for Patio and Sliding Glass Doors

 

 

SPECIFICATIONS

  • Minimum width: 18"
  • Maximum width: 120"
  • Minimum height: 18"
  • Maximum height: 144"
  • Headrail width: 1 1/2 inches
  • Headrail height:  1 1/2 inches
…  see full product description.
Customize Now >

Want a professional to measure or install? Locate one now


Customize your new 3 1/2" Nulite Prestige Vinyl Vertical Blinds

Some features and options you select could affect product pricing.
As you begin customizing this product, we'll keep the updated price in view at all times.

Price with current selections:
$38.30

Select a mount type:


Inside mount blinds and shades are mounted inside the window frame. This option provides a clean, custom look and is considered the most popular choice. This is a great option if you do not wish to cover the window moldings.


Outside mounted blinds and shades are mounted outside the window, on your wall or molding. This option can make a window appear larger. It is also a solution if the window does not meet the depth requirement for an inside mount

Do you need any special mounting hardware?

Spacer Blocks

Spacer Blocks are used with mounting brackets to provide additional space between the mounting surface and the blind. Spacer blocks are used in certain outside mount applications where there is raised trim, molding, or window framing.


Extension Brackets

Extension Brackets are sometimes needed to install outside mount blinds over raised trim or window framing



Select a size (in inches): how to measure

 

Width:
Height:
NOTE:
Due to the weight, we recommend that blinds wider than 72" be made as a 2 blinds or 3 blinds on one headrail. Dividing a large blind into two or three smaller ones makes it much easier to operate, and will extend the life of the lifting mechanism.

Please note, there will be a small gap (about 1/2") between each of the segments of the blind.

You may purchase your selection as a single headrail if you prefer. Please select from the 3 choices offered.

Select a color / pattern:

Color Disclaimer: We do our best to depict an accurate representation of the actual swatch color. Colors can vary from monitor to monitor. Please order a free sample to ensure accuracy.

Builder's Quality-Gray MAV0178
Builder's Quality-Ivory MAV0177
Builder's Quality-Off White MAV0172
Builder's Quality-Silk White MAV0171
Builder's Quality-Tan MAV0170
Concord-Beige MAV0164
Concord-Brite White MAV0163
Concord-Goldtone MAV0162
Concord-Gray MAV0161
Concord-Off White MAV0160
Concord-White MAV0159
Fremont-Beige MAV0128
Fremont-Black MAV0127
Fremont-Capri MAV0126
Fremont-Off White MAV0124
Fremont-White MAV0122
Montecito-Chenille MAV0108
Montecito-Fawn MAV0107
Montecito-Gray MAV0106
Oakdale-Beige MAV0103
Oakdale-Buckskin MAV0102
Oakdale-Glademist MAV0101
Oakdale-Gray MAV0100
Oakdale-Polar White MAV0099
Orleans-Cloud White MAV0093
Orleans-Desert Beige MAV0092
Orleans-Ivory MAV0091
Orleans-Silver Mine Gray MAV0088
Orleans-Sunset Copper MAV0087
Palisades-Crystal White MAV0079
Palisades-Kashmir MAV0078
Palisades-Merlot MAV0077
Palisades-Off White MAV0076
Plymouth-Amber MAV0069
Plymouth-Oatmeal MAV0068
Plymouth-White MAV0064
Ridgecrest-Chalk White MAV0053
Ridgecrest-Goldtone MAV0052
Ridgecrest-Off White MAV0051
Ridgecrest-Sandstone Beige MAV0050
Sonoma-Crystal MAV0045
Sonoma-Pearl MAV0043
Sonoma-Sandstone MAV0042
Stanford-Blue Haze MAV0039
Stanford-Brite White MAV0038
Stanford-Ermine MAV0037
Stanford-Glademist MAV0036
Stanford-Gray MAV0035
Tahoe-Blonde MAV0033
Tahoe-Grain MAV0032
Tahoe-Linen MAV0031
Tahoe-Sunset MAV0030
Valencia-Beige MAV0029
Valencia-Off White MAV0026
Valencia-White MAV0023
Woodbridge-Beige MAV0015
Woodbridge-Brite White MAV0014
Woodbridge-Buckskin MAV0013
Woodbridge-Glademist MAV0012
Woodbridge-Sandstone MAV0011

Select your controls:
*some options may not be available on every blind

Select your valance:

Vertical Round Valance
Vertical Square Valance

Select your style package:

Traditional Style Package
Contemporary Style Package
Classic Style Package

Select your valance:

Choose a Valance:
No Valance
Square Corner Valance
Rounded Corner Valance
Double Round Valance

*Coordinating fabric is added to the valance for a finished look.

**When selecting an Inside Mount, returns(side panels shown in picture) do not come with this valance.


Additional Comments / Room Name / Sidemarks:

 

Order Summary:

Width: edit
Height: edit
Color / Pattern: Please Select
Mount Type: Please Select
Control: Please Select
Valance: Please Select edit

$38.30

Vinyl vertical blinds are perfect for large windows or sliding glass doors. They are durable and attractive. Choose from an array color options. Vinyl verticals are low maintainance with optimal light control and privacy. These Nulite Prestige Vinyl Vertical blinds come with a lifetime warranty.

 

FEATURES

  • 60 Colors Available
  • Limited Lifetime Warranty
  • Free Shipping
  • Perfect for Patio and Sliding Glass Doors

 

 

SPECIFICATIONS

  • Minimum width: 18"
  • Maximum width: 120"
  • Minimum height: 18"
  • Maximum height: 144"
  • Headrail width: 1 1/2 inches
  • Headrail height:  1 1/2 inches



Measuring: Inside Mount

  • Always measure each window you plan to cover. Windows of different sizes can appear deceptively similar.
  • Use a steel / metal tape measure for accuracy.
  • Record measurements to the nearest 1/8" of an inch. Make sure you clearly indicate width from the height. It's very easy to accidentally transpose measurements.
  • Blinds installed on windows near wall or baseboard heaters must clear the heaters by 12" above and 6" to the sides

IMPORTANT: Measure the actual window opening size. Please do not make deductions. Our factory will take all necessary allowances to ensure proper headrail fitting.

  1. STEP 1 – Find the width: Measure the opening across the top, where the headrail is to be installed, from inside of window frame on left to inside of window frame on right. Round the measurement down to the nearest 1/8".
  2. STEP 2 – Find the height: Measure from the inside top of the opening on the left, at the center, and on the right to the sill; to the closest 1/8". Use the shortest dimension.

Considerations for choosing an inside mount

Inside mount blinds and shades are mounted inside the window frame. This option provides a clean, custom look and is a great option if you do not wish to cover the window moldings.

Although inside mounts are a popular choice, there are a few things to consider before choosing an inside mount.

  • Frame Depth: Inside mount blinds and shades require a minimum mounting depth within your frame. This number varies by window covering type and manufacturer. Review the product info / specs tab for more information. If your window frame isn't deep enough for the style you've chosen, an outside mount is recommended.
  • Obstacles: Obstacles such as window handles or cranks can interfere with the operation of your inside mount treatment. If your window has any type of obstacle, consider choosing an outside mount.

  • Squareness: For inside mount your window should be square, if not, your treatment may not hang or operate properly. Check for squareness by Measuring diagonally in both directions. If measurements differ by more than 1/2", consider choosing an outside mount.
  • Light Gap: A small deduction in width is taken by the factory to allow for proper operating clearance when mounting inside. This causes a small gap on each side of the window covering affecting the blind or shade's ability to darken a room. For optimal light control, outside mount is recommended or you may add a secondary window treatment such as draperies to hide the light gap.

Measuring: Outside Mount

  • Always measure each window you plan to cover. Windows of different sizes can appear deceptively similar.
  • Use a steel / metal tape measure for accuracy.
  • Record measurements to the nearest 1/8" of an inch. Make sure you clearly indicate width from the height. It's very easy to accidentally transpose measurements.
  • Blinds installed on windows near wall or baseboard heaters must clear the heaters by 12" above and 6" to the sides

IMPORTANT: For outside mount applications allow the blind to overlap 1 1/2" – 3" on the sides, top, and bottom of the window. You'll need to add this to your measurements.

  1. STEP 1 – Find the width: Measure the width of the area to be covered at the place where the headrail will be installed to the nearest 1/8". Blind should overlap opening at least 4" on each side to ensure privacy. To maintain the maximum view, allow adequate overlap and consider the stack width.
  2. STEP 2 – Find the height: Measure the height of the area to be covered round down to the nearest 1/8". Blind should extend at least 3" above and 3" below opening or window moulding.
  3. NOTE – For installations to the floor, deduct 1/2" from the shortest height for proper clearance.

Considerations for choosing an outside mount

Outside mounted blinds are installed on your wall or molding surrounding the window and can make a window appear larger. It is also a solution when the window is not deep enough for an inside mount.

  • Surface area above window: Outside mounted blinds and shades require a minimum mounting surface above your window or on the window frame for installation brackets. When choosing an outside mount, make sure you have space for adequate overlap on each side of the window.

Blinds & Shades:

We offer FREE SHIPPING on all our custom blinds & window shade orders shipping within the contiguous United States. Products under 94" in width (or length for vertical blinds) ship free of charge via UPS and/or FedEx from the manufacturing facility located closest to you. Oversized shipments require delivery via freight with a one-time shipping cost of $70.00 per order.

Shutters:

Due to packaging and weight shutters do not ship free. All Shutter orders ship at a flat rate of $70.00 per order.

Commercial Orders:

Commercial orders will be quoted with the cost of shipping.

Alaska & Hawaii

Shipping to Alaska and Hawaii have additional charges and will be quoted at the time the order is placed.

Next day or second day air shipping is available on many, but not all, products at an additional cost. This is quoted when requested.

Product Warranty: Nulite Prestige brand

All our finely crafted blinds, shutters, and shades are manufactured to the highest standards of quality control by skilled American craftsmen.

Limited Warranty:

Mariak Industries, Inc. ("Mariak") warrants to the original purchasers of its products, upon the terms of this Limited Warranty, that if installed, used and maintained according to Mariak's written instructions, the products will be free from manufacturing defects for the reasonable lifetime of the project for which to product was originally purchased, effective from the date of purchase by the original purchaser, not to exceed twenty- five (25) years. No salesperson, dealer, retailer nor any representative of Mariak has the authority to modify this Limited Warranty in any way, either verbally or in writing. No other warranties are made except as set forth herein, and said Warranty is limited by the following terms and conditions

This Warranty shall remain in effect only if Mariak's product has been installed by an authorized dealer, and maintained, cleaned, treated and used correctly. This Limited Warranty shall not apply if the product has been damaged due to alteration, accident, misuse, misapplication, improper installation, abuse, normal wear and tear, exposure to the elements, improper maintenance or handling, fire, flood, or other acts of God. The obligation of Mariak and its dealers is limited to the repair and replacement of the window coverings and/or components found to be defective and excludes shipping charges and labor cost for measuring and installation.

Product Use:

This Limited Warranty applies only in respect to products that are used strictly for the purpose in which they were designed, manufactured, sold and intended.

Specific Products:

Cords used in aluminum blinds, vertical blinds, cellular shades and roman shades are warranted for a period of three (3) years from the date of purchase by the original purchaser. Electric motors and electronic controls shall be warranted for a period of five (5) years and one (1) year, respectively, from the date of purchase by the original purchaser. Mariak warrants Exterior Roller Shade Fabrics for a period limited to ten (10) years. The Exterior Roller Shade warranty excludes any problems with shades due to the operation of the shade by the end user during inclement weather conditions, which will result in wrinkling of the fabric and improper function of the shade. Exterior Roller Shades are not designed to operate under windy and rainy weather conditions. Fading and discoloration are a natural occurrence over time and are not covered under this Limited Warranty.

Warranty Limitations:

  • THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF, EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHETHER OR NOT ARISING FROM ANY TRADE USAGE OR COURSE OF DEALING, WITH RESPECT TO THE PRODUCTS OF MANUFACTURER.
  • IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR LOSS OF PROFITS, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY PRODUCT COVERED BY THIS LIMITED WARRANTY, OR INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION LOSS OF USE, LOSS OF TIME OR INCONVENIENCE, OR EXPENSES SUCH AS TELEPHONE, TOWING, CRANE, LIFT CHARGES AND HAUL OUT CHARGES.
  • IN NO EVENT SHALL MANUFACTURER'S LIABILITY HEREUNDER EXCEED THE COST OF THE PRODUCT.
  • SOME STATES DO NOT ALLOW THE EXCLUSION OF LIMITATION OF INCIDENTAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. ALSO, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

Exclusions from Limited Warranty Coverage:

The following are excluded from coverage under this Limited Warranty:

  • Exposure to air pollutants and normal atmosphere conditions may cause vinyl surfaces to gradually suffer an accumulation of surface dirt and stains. These are normal occurrences and are not covered under Mariak's Limited Warranty.
  • Any defect, malfunction or failure to perform, which has occurred because of unreasonable use, improper application or failure to perform reasonable or necessary maintenance.
  • Any damage to the products or components of the products caused by settlement or structural defects of the building in which they are installed.
  • Any damage caused by wind, hail, lighting, rain, or other Acts of God, intentional acts, accidents, negligence, exposure to harmful chemicals or pollutants.
  • Any damage or defect caused by any person, licensed or not, who, after the product's manufacture, handled, transported or installed the Mariak product, regardless of that person's relationship to Mariak.
  • Any product which has been repaired or modified or attempted to have been repaired or modified by any person other than a duly authorized representative of Mariak.

In the event that any part or provision of this Limited Warranty shall conflict with any present or future law, statute, ordinance, regulation or ruling, the latter shall prevail; provided, however, that the part or provision of this Limited Warranty which is affected shall be curtailed and limited only to the extent necessary to bring it within the requirements of law, and all other parts and provisions of this limited warranty shall remain in full force and effect.

In compliance with the latest manufacturing safety guidelines Mariak includes with each fully-assembled product warning tags, warning labels, safety devices and cord cleats. Installers of the finished product must adhere to the safety guidelines as established by the installation instructions and by using all devices provided by the manufacturer. It is the responsibility of the installer, as well as the end consumer, to see that all safety devices are properly installed according to the manufacturers installation instructions included with each device and remain so throughout the life of the product.