2 inch timber premium faux wood blinds

  • 2 inch timber premium faux wood blinds thumbnail

2" Timber Premium Faux Wood Blinds

$36.35

retail: $145.41 you save 75%

Final price could vary depending on the options you select.

  • + FREE shipping
  • + Lifetime Warranty
  • +

Our Timber 2" Faux Wood Blinds offer all the elegance of real wood at a fraction of the cost of real wood. Durable, warp resistant slats make this product a great choice for any area, especially rooms with high humidity or a lot of routine wear and tear.  Available in 21 colors with widths up to 108" and height of 126".

 

FEATURES

  • 9 colors available
  • Warp Resistant
  • Lifetime Warranty
  • Free Shipping
  • Comes with standard valance

 

SPECIFICATIONS

  • Minimum width: 7"
  • Maximum width:  84"
  • Minimum height: 12"
  • Maximum height: 126"
  • Blinds under 11 inches must have center tilt option
…  see full product description.
Customize Now >

Want a professional to measure or install? Locate one now


Customize your new 2" Timber Premium Faux Wood Blinds

Some features and options you select could affect product pricing.
As you begin customizing this product, we'll keep the updated price in view at all times.

Price with current selections:
$36.35

Select a mount type:


Inside mount blinds and shades are mounted inside the window frame. This option provides a clean, custom look and is considered the most popular choice. This is a great option if you do not wish to cover the window moldings.


Outside mounted blinds and shades are mounted outside the window, on your wall or molding. This option can make a window appear larger. It is also a solution if the window does not meet the depth requirement for an inside mount

Do you need any special mounting hardware?

Spacer Blocks

Spacer Blocks are used with mounting brackets to provide additional space between the mounting surface and the blind. Spacer blocks are used in certain outside mount applications where there is raised trim, molding, or window framing.


Hold Down Brackets

Hold Down Brackets are used to secure the bottom rail of your blind or window shade to the mounting surface. These are most commonly used when mounting blinds or shades to a door.


Extension Brackets

Extension Brackets are sometimes needed to install outside mount blinds over raised trim or window framing



Select a size (in inches): how to measure

 

Width:
Height:


NOTE:
Due to the weight, we recommend that blinds wider than 72" be made as a 2 blinds or 3 blinds on one headrail. Dividing a large blind into two or three smaller ones makes it much easier to operate, and will extend the life of the lifting mechanism.

Please note, there will be a small gap (about 1/2") between each of the segments of the blind.

You may purchase your selection as a single headrail if you prefer. Please select from the 3 choices offered.

Select a color / pattern:

Color Disclaimer: We do our best to depict an accurate representation of the actual swatch color. Colors can vary from monitor to monitor. Please order a free sample to ensure accuracy.

Cherry Embossed T174E
Alabaster Flat T175
Alabaster Embossed T175E
Antique White Flat T176
Antique White Embossed T176E
White Flat T177
White Embossed T177E
Natural Embossed T178E
Birch Embossed T179E

Select your controls:
*some options may not be available on every blind

Select a decorative tape:

Color Disclaimer: We do our best to depict an accurate representation of the actual swatch color. Colors can vary from monitor to monitor. Please order a free sample to ensure accuracy.

Antique TI_T009
Beige TI_T026
Black TI_T035
Bordeaux TI_T020
Brownstone TI_T013
Cappuccino TI_T033
Chantilly TI_T005
Chenille TI_T006
Chocolate TI_T032
Dark Green TI_T029
Duck White TI_T024
Dune TI_T018
Elite TI_T008
Fawn TI_T025
Florence TI_T002
Greystone TI_T014
Heather TI_T021
Madrid TI_T001
Mediterranean TI_T019
Mulberry TI_T028
Oakstone TI_T015
Palma TI_T003
Russet TI_T034
Sienna TI_T007
Skandic TI_T022
Sydney TI_T004
Taupestone TI_T012
Vintage TI_T010
White TI_T023
Willow TI_T011

Select your valance:

Please Note: Valance will be the same color as the selected slat color unless otherwise noted.


Select your style package:

Traditional Style Package
Contemporary Style Package
Classic Style Package

Select your valance:

Choose a Valance:
No Valance
Square Corner Valance
Rounded Corner Valance
Double Round Valance

*Coordinating fabric is added to the valance for a finished look.

**When selecting an Inside Mount, returns(side panels shown in picture) do not come with this valance.


Additional Comments / Room Name / Sidemarks:

 

Order Summary:

Width: edit
Height: edit
Color / Pattern: Please Select
Decorative Tape: Please Select
Mount Type: Please Select
Control: Please Select
Valance: Please Select edit

$36.35

Our Timber 2" Faux Wood Blinds offer all the elegance of real wood at a fraction of the cost of real wood. Durable, warp resistant slats make this product a great choice for any area, especially rooms with high humidity or a lot of routine wear and tear.  Available in 21 colors with widths up to 108" and height of 126".

 

FEATURES

  • 9 colors available
  • Warp Resistant
  • Lifetime Warranty
  • Free Shipping
  • Comes with standard valance

 

SPECIFICATIONS

  • Minimum width: 7"
  • Maximum width:  84"
  • Minimum height: 12"
  • Maximum height: 126"
  • Blinds under 11 inches must have center tilt option



  • Control Options

    Lift Cord on faux wood blinds. play video

Measuring: Inside Mount

  • Always measure each window you plan to cover. Windows of different sizes can appear deceptively similar.
  • Use a steel / metal tape measure for accuracy.
  • Record measurements to the nearest 1/8" of an inch. Make sure you clearly indicate width from the height. It's very easy to accidentally transpose measurements.

IMPORTANT: Measure the actual window opening size. Please do not make deductions. Our factory will take all necessary allowances to ensure proper headrail fitting.

  1. STEP 1 – Find the width: Measure exact distance to the nearest 1/8" between the inside surfaces of window frame in three places (across the top, across the middle, and across the bottom – see image). Use the narrowest measurement when ordering the width. Do not make any additional width deductions – the factory will make the appropriate deductions to ensure proper fitting.
  2. STEP 2 – Find the height: Measure exact distance to the nearest 1/8" from inside surface at top of window to the window sill in three places (on the left, middle, and right – see image). Use the longest measurement when ordering the height. If you prefer blind not to touch sill, deduct 1/4". If there is no sill, measure to the point where blind is to reach.

Considerations for choosing an inside mount

Inside mount blinds and shades are mounted inside the window frame. This option provides a clean, custom look and is a great option if you do not wish to cover the window moldings.

Although inside mounts are a popular choice, there are a few things to consider before choosing an inside mount.

  • Frame Depth: Inside mount blinds and shades require a minimum mounting depth within your frame. This number varies by window covering type and manufacturer. Review the product info / specs tab for more information. If your window frame isn't deep enough for the style you've chosen, an outside mount is recommended.
  • Obstacles: Obstacles such as window handles or cranks can interfere with the operation of your inside mount treatment. If your window has any type of obstacle, consider choosing an outside mount.

  • Squareness: For inside mount your window should be square, if not, your treatment may not hang or operate properly. Check for squareness by measuring diagonally in both directions. If measurements differ by more than 1/2", consider choosing an outside mount.
  • Light Gap: A small deduction in width is taken by the factory to allow for proper headrail clearance and operation. This causes a small gap on each side of the window covering, affecting the blind's or shade's ability to darken a room. For optimal light control, an outside mount is recommended or you may add a secondary window treatment, such as draperies, to hide the light gap.

Measuring: Outside Mount

  • Always measure each window you plan to cover. Windows of different sizes can appear deceptively similar.
  • Use a steel / metal tape measure for accuracy.
  • Record measurements to the nearest 1/8" of an inch. Make sure you clearly indicate width from the height. It's very easy to accidentally transpose measurements.

IMPORTANT: For outside mount applications allow the blind to overlap 1 1/2" – 3" on the sides, top, and bottom of the window. You'll need to add this to your measurements.

  1. STEP 1 – Find the width: Measure exact distance to the nearest 1/8" between the outermost points where the blind is to be placed. For optimum light control, this measurement should extend at least 3/4" beyond the window opening on each side (or 1 1/2" for the entire width)
  2. STEP 2 – Find the height: Measure exact distance to the nearest 1/8" from where top of blind will be located to the top of the window sill. If there is no sill, or if blind is to overlap the window frame, measure to the point where the blind is to reach.

Considerations for choosing an outside mount

Outside mounted blinds are installed on your wall or molding surrounding the window and can make a window appear larger. It is also a solution when the window is not deep enough for an inside mount.

  • Surface area above window: Outside mounted blinds and shades require a minimum mounting surface above your window or on the window frame for installation brackets. Each product type has a recommended amount of overlap on each side of the window to allow for best coverage and privacy. See product info / specs tab for more information.

Blinds & Shades:

We offer FREE SHIPPING on all our custom blinds & window shade orders shipping within the contiguous United States. Products under 94" in width (or length for vertical blinds) ship free of charge via UPS and/or FedEx from the manufacturing facility located closest to you. Oversized shipments require delivery via freight with a one-time shipping cost of $70.00 per order.

Shutters:

Due to packaging and weight shutters do not ship free. All Shutter orders ship at a flat rate of $70.00 per order.

Commercial Orders:

Commercial orders will be quoted with the cost of shipping.

Alaska & Hawaii

Shipping to Alaska and Hawaii have additional charges and will be quoted at the time the order is placed.

Next day or second day air shipping is available on many, but not all, products at an additional cost. This is quoted when requested.

Product Warranty: Timber Blinds

What Is Covered:

All products are warranted against defects in materials and workmanship.

Who Is Covered:

This warranty extends only to you as the original purchaser, in a residential application

Who Is Not Covered:

This warranty does not cover normal wear and tear or any damage or loss caused by abuse or misuse or improper installation. All materials can lose original intensity after long exposure to the sun. When left for extended periods in direct sunlight, plastics and pvc tend to crack and discolor. All cords will eventually wear out. Timber Blind Metro Shade considers these things normal wear and tear not covered by this warranty. Colors and textures vary from lot to lot and may not exactly match sample swatches or previous purchases. Products ordered outside of the recommended manufacturing specifications (oversized blinds) are not covered by this warranty. All products/SKUs discontinued in the normal course of business are specifically excluded from our warranty.

For How Long:

This warranty coverage will be for as long as you, the original buyer at retail, own our products. Any implied warranties which you may have are in duration to the time during which you, as the original buyer at retail own our products. Some states do not allow limitations on how long an implied warranty lasts.

What Will We Do:

If your product is defective during the warranty period we will, at our option, either repair or replace, without charge, that defective product. This shall be your sole remedy under this warranty.

No Liability for Incidental or Consequential Damages:

Repair or replacement of defective products are your sole remedy under this warranty and Incidental or in no event shall we be liable for transportation costs to or from the dealer, costs of removal or reinstallation of our products or incidental or consequential damages. Some states do not allow the exclusion of incidental or consequential damages, so the limitation or exclusion may not apply to you. Please inspect your orders upon receipt before taking them to your customer's home or office. By doing this we can be sure that any defects or damages never arrive at the customer's home or office. If you are in need of spare parts to keep on hand, please feel free to call our customer service department and we will gladly send them to you.

Motorization or Multiple Blinds:

Products with motorization carry a 1 year warranty. We do not recommend multiple blinds on one headrail over 108". Unless blinds over 108" are delivered via Timber Blind delivery truck to your place of business we will not guarantee freight damage or repair/remake under our existing warranty. All costs associated with freight damage are the sole responsibility of the dealer. It is our recommendation that 2 or 3 individual blinds are ordered with one common valance in order to avoid possible freight damage.

How to Get Service:

To obtain service under this warranty, return your products along with the original sales receipt to the dealer from which it was purchased. You will be responsible for transporting the product to and from the dealer.

Your Rights Under State Law:

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.